Electricity Tutorial

Revision as of 09:01, 10 July 2012 by 213.133.214.2 (talk)

Credits go to SimpleGuy and jamie guile, who loves niamh :3:

Note that this is still a Work in Progress.

Electricity Transport (IndustrialCraft 2

I connected everything but my electricity won't flow!

In IndustrialCraft 2, you'll have power generators and places/things you want to power. How that power gets itself from the generation point to where you want to use it is the focus of this Section, and it is probably one of the most important. Unfortunately, there's not a lot of pictures for where we are starting, so be prepared for a long read. So let's get on with it already.

The EU

An "energy unit" or EU is the default energy system for IndustrialCraft 2 items, and is necessary to run machines, charge items or armor, or electrocute people. It is often useful to measure the rate at which EU flows, and in Minecraft the unit of game time is called a "tick". If a game is running at full speed there are about 20 game ticks in a real-life second. Thus, when talking about rates of EU moving, being used, or being generated, it is always referred to as "EU/t" or "energy unit per tick".

However, that's not all there is to EU. Machines, whether generating the EU or using the EU, and cables (when transporting EU) utilize EU in packets. That is, let's take a hypothetical generator that generates 32 EU every tick. That EU is assigned one packet of 32 EU. Packets are hardly mentioned elsewhere, but are really the main "core" of IC2 electricity.

The reason packets are so important has to do with the way machines accept packets of energy. Lots of machines are listed on various sites as accepting of 32 EU/t energy when in use. What they don't tell you is that these machines really can accept only up to 32 EU-sized packets. That means, you can give that machine two packets of 20 EU, and it will be able to accept both of them to gain 40 EU. It can only use 32 EU per tick, so within one tick:

  • The machine gains [i]two 20 EU packets[/i] for 40 EU
  • The machine uses 32 EU, with 8 EU left over
  • The tick ends, and the remaining EU left over disappears (unless it is capable of storage)

So using packets makes life a lot more complicated. To help clarify, in the future I will use the following notation:

  • pEU by definition is "[number]-sized packets of EU". So 2 pEU is one packet of 2 EU
  • EU by definition is "[number] of EU". So packet size is not specified.

In IC2, machines are capable of accepting an infinite number of packets. However, if even one of those packets exceeds their limit then there will be violent consequences.

Here are the general rules about packets, when looking at wikis:

  • A generator, when producing X EU/t, produces one packet with size X EU.
  • Any machine that accepts EU/t accepts any number of packets per tick, but all packets must be smaller or equal to in size what a machine accepts in EU/t. If even one is greater, the machine explodes. This machine could store EU or use EU to accomplish a task.

When I give you problems, I will use the notation of EU/t when describing generators. It is up to you to realize this means only one packet of that amount of EU in one Minecraft tick. However, in appendices and data tables I will correctly reference input and output size as pEU.

So when building a EU distribution network, we have to keep both our overall energy movement in mind and how we deliver them. We don't want our overall energy (EU) to go to waste, as it is a waste of perfectly good energy! We also don't want to deliver incorrect packets (pEU), as the consequences can either be EU waste or destruction of materials!

Sample Problem #1: You have a hypothetical generator that produces 64 EU/t, according to a wiki page. Magically, that electricity is transferred to a place where it can be stored with no loss in EU/t. The particular storage unit says it only accepts 32 EU/t on a wiki page. Will the generator blow up the storage unit, or will the storage unit accept the EU peacefully? Would the storage unit accept the EU if we instead replaced the one generator with two generators that produce 32 EU/t?

Sample Problem #2: Convert the following into total EU:

a) two 64 pEU

b) 128 pEU

c) 32 EU

Convert the following into pEU:

d) 32 EU

e) 64 EU in eight packets

f) 256 EU in one packet

Find the number of packets:

g) 128 EU in 32 pEU

h) 64 pEU

i) 32 EU[/size]

Cables

Surprise, cables are how we transfer power between machines in IC2! :) Through a thorough understanding of their use, you should be able to distribute your power in an incredibly efficient manner possible. With your newfound knowledge of the pEU, EU and their "per tick" variants you should be OK. And there are even pictures! Let me be clear and say that when measuring distances, I may say "1 meter" or "1 block" or "1 block length", but all of these are equivalent to the dimension of the side of exactly 1 block in minecraft. So please don't get confused.

First, the most important thing to remember in Minecraft is, that like in the real world, cables are not perfect and not created equally! Different cables will lose energy [i]per packet[/i] at different, but set, rates. This 1 EU loss in a distance is known as energy dissipation, and it happens in discrete amounts. That is, if you fall short of the distance that an EU would dissipate, none dissipate! The following picture shows the length of the wire needed to lose at least 1 EU/t within each packet travelling along the wire. Also, notice how cables are able to be insulated, and even doubly insulated. Note that not all wires can be insulated, and not all can be insulated to the same degree. (Note: Like real life, if you try to touch an uninsulated wire you may get shocked... possibly to death)

http://s17.postimage.org/rnone1brz/Wire_Lengths.png

From left to right the cables are: Ultra-Low Current cables, Copper cables, Gold cables, High-Voltage cables, and Glass Fibre cables. From bottom to top the cables are: Uninsulated, 1x Insulated, 2x Insulated, 4x Insulated

As you can clearly see, different wires lose different EU/t per packet at different lengths. Furthermore, each cable is not able to carry equal sized pEU/t within them, although every cable can carry an infinite (theoretically) number of packets per tick. This next image shows the maximum size of packets of EU (pEU) each wire can carry, and each wire is 5 meters tall.

http://s7.postimage.org/uvzp99kor/Wire_Strengths.png

From left to right the cables are: (Same as previous image)

Ultra-Low Current cables, Copper cables, Gold cables, High-Voltage cables, and Glass Fibre cables.

Colors of Wool:

Red = 1 pEU. Yellow = 10 pEU. Green = 100 pEU.

So, what you should see between these to pictures are the following:

  • Insulation has [i]no effect[/i] on the pEU each the cable can carry, only the amount of energy dissipation over a distance.
  • In general, the lower the pEU capacity of the wire, the longer it is able to be without energy dissipation.

However, these are merely pictures to give you an appreciation for the relative amount each can handle. For exact numbers here is the table for exactly how many lengths of wire it takes to lose 1 EU in each packet, and the maximum pEU capacity of the wire:

Tin Cable Copper Cable Gold Cable HV Cable Glass Fibre Cable Detector / Splitter Cable
EU/b EU loss EU/b EU loss EU/b EU loss EU/b EU loss EU/b EU loss EU/b EU loss
Uninsulated 0.025 1 EU every 40 blocks 0.3 1 EU every 3.33 blocks 0.5 1 EU every 2 blocks 1.0 1 EU every block 0.025 1 EU every 40 blocks 0.5 1 EU every 2 blocks
Insulated (1") --- 0.2 1 EU every 5 blocks 0.45 1 EU every 2.22 blocks 0.95 1 EU every 1.05 blocks --- ---
Insulated (2") --- --- 0.4 1 EU every 2.5 blocks 0.9 1 EU every 1.11 blocks --- ---
Insulated (3") --- --- --- 0.8 1 EU every 1.25 blocks --- ---

So why is this important? Well, let's suppose you have a 1 EU/t generator and you want to link it to a machine with 61 blocks between. Guess what, no matter what cable you use, the 1 EU/t will dissipate before it reaches your machine! In fact, you could have an infinite number of 1 EU/t generators 61 blocks away from where you want the power to be, and you still won't gain any energy. There would be an infinite number of 1 pEU travelling in whatever wire you chose, and at the 41st block of cable, every packet would have lost 1 EU, becoming 0 EU packets, or effectively disappearing.

Let me illustrate overcoming this problem by supposing you only had one temporary storage machine to use. One way to overcome this dissipation problem is by breaking up the distance by putting it exactly in the middle (creating two lengths of wires, each 30 blocks in length). Thus, if you use Ultra-Low Current cable or Glass Fibre Cable, the packets would be preserved in each 30-block length wire segments, assuming that the storage machine outputs 1 pEU.

The other way to overcome this problem is by brute force. Let's assume for a second that your temporary storage machine only outputs a gigantic 2000 pEU. Let's put it right by the generators, so that there's no EU loss between generators and this storage machine, but the storage machine is still 60 blocks away from your goal. So after your generators feed it 2000 EU, it will spit out one packet of 2000 pEU. Let's say you're using uninsulated High-Voltage Cable, which is the only cable that can handle such huge packets, but loses 1 EU every block. That means, losing 1 EU per block, the packet will arrive at its destination with one 1940 pEU, for a net gain of 1940 EU. So instead of producing 2000 EU and losing it all in 1 pEU, you are producing 2000 EU and delivering a 1940 pEU! So while the higher rates of dissipation for the larger pEU cables may seem discouraging, it may be effective at delivering power great distances.

If you don't feel like losing alot of EU into the cable resistance you can "update" the current with a transformer as seen below.

Cable Splitting

NOTE THAT THIS SECTION IS UNDER REVIEW: LATEST IC2 UPDATES MAY HAD MADE THIS SECTION USELESS/OLD/DEPRICATED

Cable splitting is the fancy term for essentially having a fork in your cables. That is, a cable is a fork if you can point to a spot of cable that has more than two adjacent cables to it:

http://s17.postimage.org/4016clc6n/Fork.png

Anything non-cable such as transformers, machines, or storage units do NOT count as forks.

Although it may seem incredibly useful, it is actually harmful for a few reasons. I have done limited empirical analysis of cable forks, but did not want to try to derive any set of definite equations (as they would more than likely be more complex than useful). Here are the general principles when you want to make a fork:

  • When a fork is made, packet sizes (or pEU) are roughly split by a factor of the fork size and sent down every path. So in the image above, pEU would be split by a factor of two.
  • The number of packets passing through each cable is also roughly split according to wire type. This ratio is dependent on the incoming wire and each of the outgoing wires. The smaller the pEU the wire is able to handle, the more packets that will be sent down it.
  • Forks cause immense overall EU loss through dissipation, depending on the wire used. The best dissipation I found (so far) was only 95% loss of overall pEU size (yes, two 32 pEU can become 1 pEU).
  • The more forks you have, the more your CPU will hate you, as it has to do the above calculations really quickly.

Because of these huge inefficiencies, try to not fork cables when outputting power. Instead, like in the above picture, put an intermediate storage unit, transformer, or other input-output machine where the fork would be. Since it's not a cable there anymore, it's not a fork!

Do not create cable loops. Your computer may hate you to the point of permanently crashing your world due to the number of calculations.

Be careful placing machines next to each other, and pay attention to inputs and outputs. Two machines side by side will try to~ transfer power, so if you then try to connect them with cables you may create a loop!</spawn>

~Only machines that have outputs will transfer power, such as transformers, generators, storage units, etc. Consumer machines like Macerators, Furnaces, etc. will not transfer power to adjacent machines, as they have no output.

That being said, it is usually OK to have a Batbox output connected via short (10 squares or less) 1x insulated copper wires to various machines you want to use with forks. This is because the machines will draw discrete amounts of EU directly from the storage as needed. The above scenarios encompass cases where arbitrary EU could be sent in any fork.

% Cable Efficiency

Bottom line, To figure out how % efficient a wire choice would be, you only need to know the distance at which you need to go from Point A to Point B. Next, you merely choose a wire to check the efficiency of, get its dissipation rate & maximum packet size from the table above, and plug it into the equation below:

    100 * [1 - TRUNCATE{Total Distance / Cable Distance Efficiency} / (Maximum Cable Packet Size)] = % Cable Efficiency

Derivation of above equation if you are curious.

    100 * (Total EU Produced - Total EU Dissipated)/Total EU Produced = % Cable Efficiency
    100 * [1 - (Total EU Dissipated/Total EU Produced)] = % Cable Efficiency
    Total EU Dissipated = TRUNCATE{Total Distance/Cable Efficiency} * Number Packets
    Number Packets = Total EU Produced /Max Cable Size
    Total EU Dissipated = TRUNCATE{Total Distance/Cable Efficiency} * (Total EU Produced/Max Cable Size)
    100 * [1 - <TRUNCATE{Total Distance/Cable Efficiency} * (Total EU Produced/Max Cable Size)>/Total EU Produced] = % Cable Efficiency
    100 * [1 - TRUNCATE{Total Distance / Cable Distance Efficiency} / (Maximum Cable Packet Size)] = % Cable Efficiency[/code]

Example: Let's say I got to transfer power 120 Blocks. Using the equation above, these are my efficiencies for the most insulated wires of each type:

  • Ultra-Low Current: 40%
  • 1x Insulated Copper: 25%
  • 2x Insulated Gold: 62.5%
  • 4x Insulated High-Voltage: 95.3125%
  • Glass Fibre: 99.414%

Below are graphs of how efficient a cable is vs the distance in terms of block distance. This first one gives you an overall view of efficiencies:

http://s7.postimage.org/4r64fgnaz/Cable_Efficiencies2.png

This one should illustrate how cable efficiency operates in short distances (less than 50 blocks):

http://s18.postimage.org/9jkpqtvpl/Cable_Efficiencies_Short2.png

Note that while it seems that 1x insulated copper cables are outclassed by every other cable, they deliver a packet size most beginning & intermediate machines need in order to fully function.

Notice that Glass Fibre cables tend to break the trend for pEU dissipation that is seen in other cables. This is not a mistake. Glass Fibre cable is very expensive, as it costs one diamond to make 6 at the most. Even so, it cannot handle the largest pEU.

Sample Problem #1: This problem assumes you have no glass fibre cable available to you. If a generator is outputting 32 EU/t, and you are using 2x insulated gold cable to transport it 80 blocks away to a storage unit, how many EU/t is the storage unit increasing by? Is there a more efficient wire to use in this instance? If the generator was increased to outputting 128 EU/t, how many EU/t is the storage unit increasing by? In this case, is there a more efficient wire to use?

Sample Problem #2: You have a setup where a generator producing 10 EU/t is 60 blocks away from your storage unit. You want to use 1x insulated copper cables or Ultra-Low Current cables but they cannot deliver the power as you currently have set up. You decide to use exactly one of two intermediate storage units to deliver the power. One unit outputs 30 EU/t, while another outputs 5 EU/t. Which do you choose, where do you place it, and where do you use your 1x insulated copper and Ultra-Low Current cables?


Transformers

So now that we are experts at EU calculations and cable management, it's time to introduce the big guns. Transformers don't seem that exciting, but they exist to allow you to, say, take Micro Voltages and convert all the way up to Extreme Voltages and back down to Low Voltages at your leisure! Once you are able to do this, you truly are able to power anything since you can manage dissipation well, and provide power at the correct packet size.

First, let me introduce some common terminologies for IC2 packet sizes (or "Voltages") and the cables that can be used with them:

Packet Size Name Usable Cables
5 pEu Micro Voltage All Cables
32 pEU Low Voltage Copper, Gold, Glass Fibre, High-Voltage
128 pEu Medium Voltage Gold, Glass Fibre, High-Voltage
512 pEu High Voltage Voltage Glass Fibre, High-Voltage
2048 pEu Extreme Voltage High-Voltage

Note that from now on, I will distinguish whether a transformer has been powered by redstone or not by using these acronyms to save my fingers some trouble:

  • "NR-transformer" to distinguish a non-redstone powered transformer.
  • "RS-transformer" to emphasize a redstone powered transformer.

Now if you have ever placed a transformer, you have probably noticed that one side has three dots, and the other five sides have one. This is because what wires you run to which sides matter! No matter which transformer you use, the pattern is always the same: the more dots a side has, the higher pEU it handles. That is, if you want to transform between two packet sizes, always assume the bigger packet comes through the side with three dots, regardless whether you're transforming up or down. Note that when you first place a transformer, the side with 3 dots will be facing you by default. Using a wrench on a 1-dotted side will move the 3 dots to that side, and using the wrench on the 3-dotted side will remove the transformer.

Here is an image of an example setup:

http://s14.postimage.org/5y5l994gh/Transformers.png

What the hell? I ran my generator twice and I got more energy out the second time!


If you understand the setup above and how it works, then you're good to go. If not, and are still puzzled as to why more energy was gained than put in the generator, then understand that when redstoned, transformers have a tiny amount of storage capacity for EU! In order to transform up, it has to save enough EU from smaller packets to generate and send out a bigger packet. So when a piece of coal was first put in the generator, only 2,048 EU made it to the batbox at the bottom. The other 1,952 EU is "stuck" in the transformers since it isn't enough to fire a 2,048 "Extreme Voltage" pEU. Then, when a second coal is placed, it looks like you got 4,096 EU out of a 4,000 EU item, when really the EU from the coal used some of the the stored EU to fire two 2048 pEU from the HV RS-transformer. The lesson here is to be careful with transforming to high pEU size when your overall EU production is low.

So if you aren't convinced of how awesome transformers are then keep reading!

Proper Cable Splitting

NOTE THAT THIS SECTION IS UNDER REVIEW: LATEST IC2 UPDATES MAY HAD MADE THIS SECTION USELESS/OLD/DEPRICATED

Yes, that is right, thanks to transformers you can "split" a cable into five more cables with no dissipation loss and no cable intersections (so your computer/server CPU will thank you!).

The principle is inherent with the way transformers work. When you first heard that transformers have five one-dotted sides which output lower pEU, and that by default they transform down, you probably didn't celebrate with joy. However, these two principles can be used to purposefully get rid of cable intersections.

Enough words, here are pictures:

http://s16.postimage.org/cb6qpl0o5/Splits.png

Shoot, I lost 250 EU in there!

http://s14.postimage.org/yw248wck1/Splits_Correct.png Only 64 EU stuck in the first LV RS-transformer!

If you notice, in the first picture you have two issues going on contributing to the 250 EU loss:

  • There is a cable split
  • The copper cable is long enough for 1 EU dissipation per pEU travelling on either side

Luckily, the cable split doesn't contribute to any EU dissipation whatsoever in this setup, as 4,000 EU in 32 peU is 125 packets. I haven't performed enough trials to determine if this is 100% true, but it appears that the split turns each packet into two 16pEU, and each suffers the 1 EU dissipation, which is why 250 EU is missing. Note that trials with a 3-way split similar to this 2-way resulted in over 200 EU being lost due to splitting dissipation.

However, note the clever use of transformers in the second image. Not only do they not count for the EU dissipation due to cable length, the bottom transformer doesn't count as a cable split. Thus, the 64 EU shortfall can be contributed to the fact that it is stuck in the first LV RS-transformer as it is not big enough to produce a 128 pEU.

The drawback of this transformer split is that you must transform upwards so the second one is able to use all 5 sides with a single dot as output, allowing for up to 5-way cable splits. The fact that the transformation must be done upwards first means that you cannot split High-Voltage cable in this manner.

Current Control

Why not use the fact that transformers allow current to flow one way to create a remote storage that can be tapped into at any time?

Imagine the problem: You want to deliver power to a location from remote storage, but you also want to store energy there without putting generators all the way out there. That is, you want to be able to generate power in your house, store it in a huge array of EU storage devices elsewhere that isn't your house, but deliver power back to your house. If you run cables all the way out there and back, imagine all the EU dissipation!

Instead, you can use a combination of transformers and the "cable-splitting with Transformers" concept to control flow using redstone. The following two images should nicely convey what I mean. Note I used Eloraam's awesome RedPower 2 mod for Redstone Wiring (which can go up to 255 blocks without losing signal) and for small edging to separate the adjacent wires.

http://s18.postimage.org/l084lm1fd/Transport_Storage.png

When the lever is in one state, you can power your batteries remotely...

http://s17.postimage.org/59ebjvkbz/Transport_Usage.png

...but flick the lever, and you can use the batteries at home!



Power Generators (IndustrialCraft 2)

Section to be continued...

Power Storage (IndustrialCraft 2)

Section to be continued...

Sample Problem Solutions

The EU

SP #1: The first case would indeed blow up the storage unit. The storage unit can only accept 32 pEU. The Generator outputs 64 pEU. However, in the second case the two generators, in one tick, each produce 32 pEU for a total of 64 EU. The storage unit accepts 32 pEU, so it would store 64 EU/t.

SP #2: a) 128 EU

b) 128 EU

c) 32 EU

d) No answer is possible.

e) 8 pEU

f) 256 pEU

g) 4 packets

h) No answer is possible.

i) No answer is possible.

Cables

SP #1: The storage unit is receiving 0 EU/t from your generator, using the following logic:

Look up loss rate of 2x insulated gold cable: 1 EU loss per 2.5 blocks.

[Total # of EU loss] / [Total # blocks traveled] = [Loss Rate of Cable] [size=8pt][i](Now we plug in values)[/i][/size]

[Total # of EU loss] / [80 Blocks] = [1 EU / 2.5 Blocks]

Total # of EU loss = 32 EU


    Production Rate - Dissipation Loss = Total EU Gain per tick
    32 EU - 32 EU = Total EU Gain per tick
    0 EU = Total EU Gain per tick

Thus, it'd be more efficient to use 1x insulated copper cable, as the above equations would instead yield a total EU gain of 16 EU/t. If the generator instead outputs 128 EU/t, the total gain in the storage unit would be 96 EU/t. Only Glass Fibre would be more efficient, but none is available. Thus, 2x insulated gold cable is the most efficient in this instance.

SP #2: Optimally, we will want to start using copper cables from the generator, since Ultra-Low Current cables cannot handle 10 EU/t packets. A storage unit could be placed right next to the generator to accept power immediately with no EU loss, but then 59 blocks of distance would remain. If four 1x insulated copper cables are used before using a storage unit, then only 55 blocks would remain and no EU loss would occur. So this configuration is optimal.

The remaining 55 blocks need to be analyzed. Either two 5 pEU can be emitted and Ultra-Low Current cable can be used, or one 30 pEU can be emitted and copper cables be used. EU dissipation occurs only once for the Ultra-Low Current cable, since it happens over 40 blocks. However, it happens across two 5 pEU, so two EU is lost. This means for every 10 EU/t produced, 8 EU/t reaches the storage unit. If 1x copper wire were used instead with 30 pEU, loss occurs eleven times for 11 EU dissipation. So for every 30 EU/t produced, 19 EU/t reaches the storage unit. Using percentages, the Ultra-Low Current cable keeps 80% of the EU produced intact, while only 63.3% of the EU produced is intact when using 1x insulated copper cable.

Thus, four 1x insulated copper wires would be used to go from the generator to the 5 pEU intermediate storage device, and then 55 Ultra-Low Current cables would be used for a maximum efficiency of 80%.

Recipes, Information & "What can I make!?"

In this section you'll find how to build pretty much everything that somehow touches an Energy Unit. You'll see the item name, a list of all the basic resources you need to craft one, pictures that show step-by-step how to craft one from scratch, and then a thorough description and EU knowledge about the machine. Note that when it comes to ingots, I will list the amount of dust you need (assuming you macerate ores), the amount of ore you need (assuming you don't macerate ores), and the amount of ingots you need (assuming you just keep everything as ingots). These are all equivalent, you do not need to have all 3. Also realize that refined iron and steel are equivalent.

Cables

Ultra-Low Current Cable


Tin

Tin

Tin

Tin Cable

GridNumbersCSS.png


Maximum Packet Size: 5 pEU

EU Dissipation: 1 EU per packet every 40 blocks

This cable is uninsulated and cannot be painted. Since it is in fact uninsulated, it is capable of shock. Field trials with over 150 Solar Panels and a batbox could not produce enough current to shock a creature.

Uninsulated Copper Cable

1x Insulated Copper Cable

Uninsulated Gold Cable

1x Insulated Gold Cable

2x Insulated Gold Cable

Uninsulated High-Voltage Cable

1x Insulated High-Voltage Cable

2x Insulated High-Voltage Cable

4x Insulated High-Voltage Cable

Glass Fibre Cable

EU Storage Devices

Section to be continued... PS. I have never had sex before. Have Fun!

EU Generators

Section to be continued...

EU-Using Machines

Section to be continued...

SimpleGuy's Simple Plan to EU Generation & Use

Section to be continued...

Erectin' a dispenser!


To-do list:

  • Fix the first image to make it more clear
  • Find a number two
Cookies help us deliver our services. By using our services, you agree to our use of cookies.

Need wiki hosting?

Do you need a wiki for your Minecraft mod/gaming wiki? We'll host it for free! Contact us.

Other wikis

Indie-game wikis
Powered by Indie Wikis