The Frame Motor is a block that can move Support Frames. It needs Blutricity and Redstone power to work, by the Blutricity (needs to be connected to the blank face of the motor) powering the motor, and Redstone power 'activating' it.
When powered, this motor will try to move any block on its "top" side in the direction indicated by the arrow. If the block connected to the side is a support frame, it will try to move the whole frame and connected blocks.
The Frame Motor has a moving limit of 1,000 blocks which can be changed in the configuration file. (Configuration file can be found in "AppData\Roaming\.techniclauncher\tekkit\redpower")
There are 2 blue points and a red point on 2 faces. When the motor has Blutricity, the blue points became lighter, and when it works, the red point is lighter too.
The Frame Motor requires 60V to function.
Adding motors does NOT increase the blocks able to be moved.
<youtube width=222 height=142>TNEDuPhGMgg</youtube> <youtube width=222 height=142>gcp7gNPSdfU</youtube> <youtube width=222 height=142>JZ5isiMYMVg</youtube> <youtube width=222 height=142>itCyMWTBU_0</youtube> <youtube width=222 height=142>V5DGugnRrGw</youtube> <youtube width=222 height=142>IEh5hYWiDog</youtube>